| 1. Precision Universal Tester | Routine tensile, compression, flexural, peel, and puncture testing | 5–100 kN, interchangeable load cells | Typically ±0.5% of indicated force or better, when calibrated | 0.001–1,000 mm/min, depending on configuration | 20–300 mm, adjustable fixture | Plastics, composites, metals, rubber, paperboard | Rigid two-column frame, digital force and displacement measurement, programmable speed control, interchangeable fixtures | Quality-control laboratories requiring one machine for multiple methods |
| 2. High-Force Floor-Standing Tester | High-load tensile and three-point bending tests | 100–600 kN | Typically ±0.5% of indicated force or better, with a suitable calibrated load cell | 0.001–500 mm/min | Up to approximately 1,000 mm with dedicated fixtures | Structural metals, large composites, concrete-related components, construction materials | Heavy-duty frame, guarded test area, large daylight opening, hydraulic or electromechanical drive options | Industrial laboratories testing large or high-strength specimens |
| 3. Benchtop Materials Tester | Low- and medium-force tensile and flexural testing | 1–10 kN | Typically ±0.5% of indicated force or better in the calibrated range | 0.01–1,000 mm/min | 15–250 mm | Thermoplastics, films, thin sheets, adhesive joints, small composites | Compact footprint, quick fixture changes, touchscreen or computer control, suitable for frequent laboratory use | Small laboratories, education, product development, and incoming inspection |
| 4. High-Speed Electromechanical Tester | High-throughput tensile and flexural testing with automated data capture | 10–50 kN | Typically ±0.5% of indicated force or better, subject to load-cell range | 0.001–2,000 mm/min | 25–300 mm | Packaging, plastics, textiles, films, medical materials, consumer products | Servo-controlled motion, high sampling rate, automatic return, method libraries, extensometer compatibility | Production environments needing repeatable tests and efficient workflow |
| 5. Environmental-Test Universal Machine | Tensile and three-point bending tests at controlled temperature or humidity | 5–100 kN, depending on chamber and frame | Typically ±0.5% of indicated force or better after calibration | 0.001–1,000 mm/min | 20–250 mm inside the environmental chamber | Polymers, elastomers, adhesives, composites, packaging, temperature-sensitive materials | Temperature range commonly around −70 to +250 °C, humidity control available on selected systems, sealed chamber and remote grips | Research and development where material behavior changes with temperature or humidity |
08045479132
Send Inquiry
Send Inquiry
Send SMS
